- 10 -
Alternatively you can manually run the Internet Wizard if you want to connect to a
different WiFi network. This can be accessed from the System Setup
Internet
Setup menu in the MAIN MENU.
The Internet Setup menu consists of 4 options:
Wizard, PC Settings, View Settings and Manual Settings.
6.1 Wizard:
1. Select the Wizard.
2. The Wizard will then automatically scan for available Wireless or Wired
(Ethernet) networks and a list is displayed.
3. Turn the TUNE knob to either select desired network (SSID) or select one of
the three other options. Rescan (Performs a rescan for networks), Wired
(Optional) (Will select Ethernet) or Manual Config (Will allow user to manually
configure the Wireless setup).
4. If the network has no security the following messages appears – “Please wait
Connecting”, “Please wait Acquiring address” and “Connected” The Internet
Radio menu will be displayed.
5. If the network has a security feature enabled the BT-H1506A will prompt you
to enter the key or pass phrase. The security details must match the security
information configured in the wireless access point. The authentication type
(WEP, Open, WPA or WPA2) will automatically be detected.
6. Password Entry:
Turn the TUNE knob to display different sets of characters and numbers. Use
the ARROW buttons to move the flashing cursor to select the desired
characters.
When entering key or pass phrase:
The “<” symbol = Delete last character
The “
” symbol = Enter
The “C” symbol = Cancel
6.2 Manual Config
More advanced users can also edit their WiFi settings by selecting the System Setup
Internet Setup
Manual Settings menu.
Selecting Manual Settings allows you to manually configure your network. First
choose between Wired (Optional) or Wireless. Press TUNE knob to confirm. Then
choose between DHCP enable or disable.
Choose enable if you want DHCP to automatically acquire an IP address. Press
TUNE knob to confirm. Enter SSID (Same procedure as explained above (6). Turn
TUNE knob to choose between authentication type (Open, WEP, WPA or WPA2).
