- 26 -
Choose your desired setting.
10.5.1 DHCP enable
Display will show:
Enter “SSID” by using “TUNE” knob on front panel.
Use navigation keys “UP/DOWN” on remote or turn “TUNE” knob to choose between
numbers, letters, capital letters or special characters.
Enter SSID using >>| <<| buttons on front panel to choose correct number/letter and
press “TUNE” knob on front panel to confirm.
When whole SSID is entered correctly choose
to proceed. Choose “<” to clear
and “C” to cancel.
Display will show:
Choose your Security. If Open is chosen (No security) radio will connect. However
having No security is not recommended. If any other security (WEP, WPA, WPA2) is
chosen, display will show:
If WEP is chosen: If WPA is chosen: If WPA2 is chosen:
Choose your desired setting. Display will show:
Enter “Key” by turning “TUNE” knob on front panel.
Use “TUNE” knob to choose between numbers, letters, capital letters or special
characters.
Enter key using >>| <<| buttons on front panel to choose correct number/letter and
press “TUNE” knob on front panel to confirm.
When whole key is entered correctly choose
to proceed. Choose “<” to clear and
“C” to cancel.
Radio will connect.
10.5.2 DHCP disable
Display will show:
SSID
0123456789<
C
>Open
WEP
WPA
WPA2
>Open
PSK
>TKIP
AES
>TKIP
AES
Key:
0123456789<
C
