Hardware User Manual - Argos3D-P220
Last change: 2 August 2018
Version 5
© BECOM BLUETECHNIX 2018
Page 17 | 21
6.1.2
Temperature at the case
The following figure shows the expected case temperature @ 25°C ambient temperature depending on the
frame-rate integration time product (FITP). The FITP has been calculated as follow:
𝐹𝐼𝑇𝑃 = 𝑡
𝐼𝑁𝑇
[𝑚𝑠] ∙ 𝑓𝑝𝑠 [
1
𝑠
] ∙ 4
Figure 6-2: Expected cooling plate temperature depending on frame-rate integration time product
The temperature on the casing can be reduced by mounting an additional heat sink on the cooling plate.
Caution
The user is responsible to take care for an appropriate cooling if the Argos camera is mounted
into a case.
Caution
Be careful to not stress the device beyond the limits, otherwise you may damage the device.
6.2
Optical Characteristics
Symbol
Parameter
Min
Typical
Max
Unit
#LEDs
Nr. of LEDs
6
Λ
CENTROID
Centroid-Wavelength of Illumination
850
nm
0
10
20
30
40
50
60
70
0
100
200
300
400
500
600
700
800
900
T
e
mpe
ra
tu
re
[
°C]
FITP
Casing temperature depending on FITP
