Hardware User Manual - Argos3D-P220
Last change: 2 August 2018
Version 5
© BECOM BLUETECHNIX 2018
Page 6 | 21
1
General Information
This guide applies to the Argos3D-P220 camera platform from BECOM BLUETECHNIX GmbH. Follow this
guide chapter by chapter to set up and understand your product. If a section of this document only applies
to certain camera parts, this is indicated at the beginning of the respective section.
The document applies to product V1.5.
1.1
Symbols Used
This guide makes use of a few symbols and conventions:
Warning
Indicates a situation which, if not avoided, could result in minor or moderate injury and/or
property damage or damage to the device.
Caution
Indicates a situation which, if not avoided, may result in minor damage to the device, in
malfunction of the device or in data loss.
Note
Notes provide information on special issues related to the device or provide information that will
make operation of the device easier.
Procedures
A procedure always starts with a headline
1.
The number indicates the step number of a certain procedure you are expected to
follow. Steps are numbered sequentially.
This sign
indicates an expected result of your action.
References
This symbol indicates a cross reference to a different chapter of this manual or to an
external document.
1.2
Certification
1.2.1
CE Declaration
BECOM BLUETECHNIX hereby declares that this Argos3D-P220 product is in compliance with the essential
requirements and other relevant provisions of Directive 2014/35/EU.
