DA11USB
QUICK REFERENCE GUIDE
03
Contact:
|
|
RevA3_QRG_DA11USB_Working
Advanced Dante Settings
It is also possible to change the settings of the DA11USB under the “Device Info” screen in the Dante Controller
software. To do so, select the “Device Config” menu.
Here we can adjust the sample rate of the DA11USB. Please note that Dante products can only transmit or receive
audio from other Dante products that are set up with the same sample rate. A mismatch in sample rate may stop
audio from transmitting.
Under the “Device Config” screen we can also adjust the latency of the DA11USB from 1, 2 or 5 milliseconds.
