background image

DA11ADE

 QUICK REFERENCE GUIDE

04

www.blustream.com.au 

|

 www.blustream-us.com 

|

 www.blustream.co.uk

Specifications

Audio Input Connectors: 

1 x RJ45, female (100 Mbps Dante® network) 

Audio Output Connectors:

 6-PIN Phoenix connector (2ch balanced/un-

balanced analogue audio)

Casing Dimensions (L x W x H):

 120mm x 47mm x 26mm

Shipping Weight:

 

0.3 Kg

Operating Temperature:

 32°F to 104°F (0°C to 40°C)

Storage Temperature:

 - 4°F to 140°F (- 20°C to 60°C)

Power Supply:

 Class 1 IEEE 802.3af POE PD or 12V/1A DC 2-PIN Phoenix connector

Package Contents

• 

1 x DA11ADE

• 

1 x Quick Reference Guide

Acknowledgements

Dante® is a registered trademark of 
Audinate Pty Ltd. 

DA11ADE

Example Schematic

CAT Cable
Analogue Audio

DA11ADE

Dante

®

 Audio Analogue Decoder

DA11AEN

Dante

®

 Audio Analogue Encoder

Analogue

Audio Output

(2 x channels)

DA11ADE

DA11AEN

Analogue

Audio Input

(2 x channels)

1G Network Switch

Dante®

Controller

FCC NOTICE

This equipment has been tested and found to comply with the 

limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection 

against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency 

energy and, if not installed and used in accordance with the 

instructions,
may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful 

interference to radio or television reception, which can be 

determined by
turning the equipment off and on, the user is encouraged to try to 

correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from 

that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for 

help.

CAUTION

 - changes or modifications not expressly approved 

by the party responsible for compliance could void the user’s 

authority to
operate the equipment.

CANADA, INDUSTRY CANADA (IC) NOTICES

This Class B digital apparatus complies with Canadian ICES-003.
Operation is subject to the following two conditions: (1) this device 

may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired 

operation of the device.

CORRECT DISPOSAL OF THIS PRODUCT

This marking indicates that this product should not be disposed 

with other household wastes. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, 

recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and 

collection systems or contact the retailer where the product was
purchased. They can take this product for environmentally safe 

recycling.

Certifications

Содержание DA11ADE

Страница 1: ... balanced 2ch analogue audio Supports 44 1 48 96 KHz sample rates 24 Bit Configurable Dante device latency supports 1 2 or 5ms configurable using Dante Controller Supports AES67 RTP audio transport Features Class 1 802 3af PoE for powering of product from any PoE switch Local 12v power supply input for when network switch does not support PoE PS121PH power supply sold separately FEATURES Connectio...

Страница 2: ...dio routing between Dante transmitters and receivers in your system Please ensure your PC is on the same network as your Dante devices Dante is not able to transmit over WiFi and it is recommended to hardwire into the Dante network Having multiple network devices enabled can also confuse the Dante Controller software so it is recommended to disable WiFi during configuration By default the DA11ADE ...

Страница 3: ...s can only transmit or receive audio from other Dante products that are set up with the same sample rate A mismatch in sample rate may stop audio from transmitting Under the Device Config screen we can also adjust the latency of the DA11ADE from 1 2 or 5 milliseconds SWITCH POSITION OUTPUT SENSITIVITY 1 18dBu 2 4dBu 3 0dBu 4 0dBV 5 10dBV Depending on the connected audio device it may be necessary ...

Страница 4: ...e that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and r...

Отзывы: