DA11ADE
QUICK REFERENCE GUIDE
03
Contact:
|
|
RevA3_QRG_DA11ADE_211126
Advanced Dante Settings
It is also possible to change the settings of the DA11ADE under the “Device Info” screen in the Dante Controller
software. To do so, select the “Device Config” menu.
Here we can adjust the sample rate of the DA11ADE. Please note that Dante products can only transmit or receive
audio from other Dante products that are set up with the same sample rate. A mismatch in sample rate may stop
audio from transmitting.
Under the “Device Config” screen we can also adjust the latency of the DA11ADE from 1, 2 or 5 milliseconds.
SWITCH POSITION
OUTPUT SENSITIVITY
1
+18dBu
2
+4dBu
3
+0dBu
4
0dBV
5
-10dBV
Depending on the connected audio device, it may be necessary to adjust the gain or output sensitivity.
The DA11ADE features a 5 pin switch on the side of the device to adjust the output gain of each channel from
various settings b24dBu to -10dBV.
Gain Adjustment
