INSTRUCTION MANUAL
BSPRT01-2-3
Charging the Battery
Power
1. Power ON your headphones:
2. Power OFF your headphones:
Pairing the Headphones:
1
. Turn your phone
OFF
entirely and then turn it back
ON
to refresh its Bluetooth memory.
2
. Find the Bluetooth menu on your Bluetooth device and turn the Bluetooth function
(Check your Blueooth device’s user guide for instructions on finding the Bluetooth menu)
ON
4
. On your Bluetooth device, perform a Bluetooth “device discovery” to add the headphones as a new device.
5
. When the headphones are discovered (found) the device will display “
BSPRT01-2-3
” in the menu. Choose/Tap on “
BSPRT01-2-3
”.
6
. If prompted by your device to enter a code, enter; "
0000
" and the device will now pair with the headphones and be ready to use.
7
. If supported by your phone menu, set the
BSPRT01-2-3
as "set as authorized "or "add to trusted devices".
8
. Keep the Bluetooth function on your phone
ON
with your phone near, and the headphones will automatically pair.
9
. If the pairing is not successful, the headphones will shortly return to the standby mode. Please repeat the process to try pairing again.
10.
Refer to your Bluetooth device’s User Manual for any additional steps or special features for your device.
Note
: To conserve power, the unit automatically turns off when not paired with your Bluetooth Phone.
For Assistance please call 1-855-719-8324. Do NOT return this product to your retailer.
Operating the Headphones:
1.
To
ANSWER or END a call:
2.
To REJECT* a call:
3.
To REDIAL* the last call:
Press the Multifunction button twice while the headset is in “Standby mode” (not currently on a call or listening to music).
4. T
o adjust the VOLUME:
5.
To PLAY/PAUSE music:
3
. With the headphones OFF, hold the headphones 12” inches away from your Bluetooth device and
Press and Hold the Multifunction button for about 6 seconds until the LED Indicator flashes blue and
red alternating which indicates your headphones are in PAIRING MODE and are now ready to be
“paired” with your Bluetooth device.
Press the Multifunction button once when there is an incoming call to answer. Press the Multifunction button once again to end the call.
Press and Hold the the Multifunction button (approx. 2 seconds) when there is an incoming call you want to ignore/send to voicemail.
* To use these functions, your phone/device must also support the Bluetooth Profile.
Press and Hold the Multifunction button for about 3 seconds.
Press and Hold the Multifunction button for about 3 seconds.
You will hear a short beep, and the LED will flash RED.
You will hear a short beep, and the LED will flash BLUE.
11.
To pair a second device, turn the first device’s Bluetooth function
OFF
, then repeat steps 3-10 using the second device. Turn the headset
OFF
. Turn the first device’s Bluetooth function back
ON
. Then turn the headset back
ON
. Both devices should automatically pair.
6.
To change the SONG / TRACK:
Press the
VOL+
button to Increase Volume. Press the
VOL-
button to Decrease Volume.
While listening to music, press the Multifunction button once to Pause playback. Press the Multifunction button once again to resume.
To Skip to the Next Song Press and Hold the
VOL+
button. To Skip to the Previous Song Press and Hold the
VOL-
button.
Disconnecting the Headset:
To Disconnect or Unpair your device from the headphones go to the Bluetooth menu on your device and choose Disconnect under BSPRT01-2-3.
Refer to your phone/device’s instruction manual for instructions on finding the Bluetooth Menu and any additional steps for disconnection.
Before using the headphones, fully charge the battery by plugging
the provided cable into the Charging Port on the headphones, and
a USB power source (not included). The LED Indicator will turn RED
when the headphones are charging. The LED Indicator will turn OFF
when the battery is fully charged.
Multifunction Button
Charging Port
LED
Indicator
Vol+ Button
Vol- Button
ALL Controls &
Microphone are
located on the
RIGHT Earphone
