Bluestone SIB-3806, Руководство пользователя

Страница: 11 / 15

ENGLISH ENGLISH
13
14
15
16
17
18
The filling aperture must not be opened during use.
The iron must be used and rested on a stable surface.
When placing the iron on its stand, ensure the support surface is stable.
The iron is not to be used if it has been dropped, visible damaged
or leaked.
Do not repair the unit by yourself because of high voltage inside.
The appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible
for their safety.
FOR STEAM IRON:
When using steam iron, it is recommended to use distilled water.
Burns can occur from iron the hot metal parts, hot water, or steam.
It is cautioned when you turn a steam iron upside down – because
there may still have hot water in the reservoir.
Use steam when temperature knob is at least at “ ”
Do not use chemical additive, scented substances or decalcifiers.
Failure to comply with the above-mentioned regulations leads
to the loss of guarantee.
NOTE:
When using the iron for the first time, you may notice a slight emission
of smoke and hear some sounds made by expanding plastics. This
is quite normal and it stops after a short time. We also recommend
passing the iron over an ordinary cloth before using it for the first time.
FILLING WITH WATER (FOR STEAM- IRONING AND SPRAYING)
SETTING THE TEMPERATURE
Please fill this iron with distilled water before using for the first
time.
For refilling, you can use tap water.
Do not use hard water.
Do not fill the water tank exceed the MAX indication.
The steps for filling water:
Remove the main plug from the wall socket before filling the iron.
Set the steam control to no steam position and temperature
control to “Min” position.
Open the filling funnel.
Pour water into the filling aperture.
Use the measuring beaker with spout for this purpose.
Close the filling funnel.
Set ironing temperature.
Stand the iron on its end.
Insert the main plug into the wall socket.
Set the temperature control to the correct ironing temperature.
PREPARING FOR USE
GARMENT LABEL FABRIC TYPE
THERMOSTAT
REGULATION
Synthetic Low temperature
Silk - wool Medium temperature
Cotton - linen High temperature
Fabric not to be ironed
21 20