37
S
ETTINGS
The Settings screen is used by the technician during installation or service calls
to optimize the oven’s
performance. If you reach this screen by accident, press
Cancel
to return to the previous screen.
C
HANGING TEMPERATURE SCALE FROM
C
TO
F,
OR
F
TO
C
1. Select
Top Oven
or
Bottom Oven
from the Home screen.
2. Press
Other
on the Main Menu display.
Figure 1
3. Press
Settings
on the
Other
display.
Figure 2
4. Press
Enter Password
.
Figure 3
5. Enter
12345
on the keypad and press Start.
Figure 4
6. Press
F
or
C
located in the top right of the screen.
Figure 5
7. Press
Save & Exit
.
Figure 5
Figure 1
Figure 2
Figure 3 Figure 4
HYSTERESIS & OFFSETS
The hysteresis setting determines how quickly the oven responds to a change in temperature sensed by
the probe. Increasing this number will make the oven react slower while decreasing the number will make
it react faster. The factory default and recommended setting is 2.
Oven probe offset allows you to calibrate the center of the oven temperature to the probe location. A
number followed by a + will decrease the center oven temperature while a number followed by a
– will
increase the center oven temperature. The oven is factory calibrated and changes to this setting are not
recommended.
Product Probe offset allows you to calibrate the product probe. A number followed by a + will decrease
the probe temperature while a number followed by a
– will increase the probe temperature. The probe is
factory calibrated and changes to this setting are not recommended.
Bottom Bake offset allows you to calibrate the baking stone temperature to the probe location. A number
followed by a + will decrease the stone temperature while a number followed by a
– will increase the
stone temperature. The oven is factory calibrated and changes to this setting are not recommended.