33
OPERATING THE OVEN USING THE DISPLAY PANEL
D
EHYDRATE
Foods must be dried to below .60 water activity or dry to
the touch to be safely stored with no danger of mold,
yeasts or bacteria growing.
1. Select
Top Oven
or
Bottom Oven
from the Home screen. Remove
oven probe from oven to prevent damaging it.
2. Press
Cook Modes
on the Main Menu display.
Figure 1
3. Press
Dehydrate
on the Select Cook Mode screen.
Figure 2
4. Press
Set Temp
on the Dehydrate screen.
Figure 3
5. Select one of the preset Dehydrate temperatures and press
Start*
,
or press
Other
to enter a different temperature.
Figure 4
6. If
Other
, enter your desired temperature, then
Start
.
Figure 5
a. In Dehydrate mode, the oven can operate at
temperatures between 80 and 200 degrees F. Entering a
temperature outside of this range will result in an error
message.
7. The oven will begin preheating.
Figure 6
See
Attention
below.
8. When the oven is preheated, an alarm sounds three times, then
once every 10 seconds. The
Oven Ready
screen appears.
Figure 7
9.
Place baking dish in the oven and select
Start
. The
Dehydrate
screen appears.
Figure 8
10. At the end of the selected bake time, the Cooking Complete screen
is displayed. An alarm will signal twice and then once every 10
seconds until one of the following actions is taken.
Figure 9
d. Select
Off
to turn off the oven and remove food.
e. Select
Continue Cooking
to return to the Proof screen.
Figure 3
f.
Select
Hold & Keep Warm
to keep your food in the
oven at a specific temperature until you are ready to
serve.
11. If you select
Hold & Keep Warm
, press the
Set Temp
to display the
set temperature screen.
Figure 10
Do not place food in the oven before or during the
preheating process. The oven uses a combination of
heating elements during the preheating process to
achieve the specified temperature.
Beware that the oven loses heat slowly and that
food will continue cooking in the
Hold & Warm
mode.
Keeping the oven light on while baking will increase
the oven temperature approximately 15 degrees F.
*S
ET
C
OOKING
T
IME
1. From the Dehydrate screen, press
Cook
Time
.
Figure 3
2. Use the buttons on the touchpad to select desired cooking time, and
press
Set
.
Figure 11
3. Return to the last screen displayed.
4. The cooking time countdown begins after the oven has preheated.
If the cooking timer is not set, the oven will continue
to operate at the selected temperature.
Figure 1
Figure 2
Figure 3 - Dehydrate
Figure 4 - Dehydrate
Figure 5 - Dehydrate
Figure 6
Figure 7
Figure 8
– Dehydrate
Figure 9
Figure 10
Figure 11
ATTENTION
ATTENTION
ATTENTION