06
Cleaning & Maintenance
Always check and adhere to national regulations when disposing of any tools that are no longer
functional and cannot be repaired.
• Contact your local waste disposal authority for information on how to correctly dispose
of tools.
• Do not dispose of any power tools within domestic waste.
• Do not incinerate.
Disposal
Daily Maintenance
ALWAYS
ensure any water has been drained from the compressed air supply before performing
any cleaning or maintenance.
We recommend oiling the tool before each use. To do this please do the following –
•
Turn the air hammer upside down and pour 1-2 drops of the air-line oil into the air inlet.
•
If the air hammer is in constant use this process should be repeated after every two to three hours.
Cleaning
To maintain best tool performance we recommend cleaning and performing the following mainte-
nance on the air hammer –
•
ALWAYS
ensure the tool is cleaned after each use and before it is stored away.
• Clean the air inlet and flush out the tool with gum solvent to clean any deposits from the air
hammer.
Storage
Before storing the tool we recommend running a few drops of air-line oil into the air inlet, then
running the tool. This will oil the internal parts of the air hammer and help maintain best
performance.
•
ALWAYS
ensure the tool has been disconnected from the air supply.
•
ALWAYS
check over the tool for damaged or worn parts before storing. If any damage is
found you will need to replace.
•
ALWAYS
ensure the tool is stored in a safe, dry place that is out of reach from children.
