1. Retaining Spring
2. Cylinder
3. Retaining Ring
4. Trigger
5. ¼” BSP Air Inlet /
Hose Adaptor
6. Regulator
7. Taper Punch
8. Tailpipe Cutter Chisel
9. Spot Weld Breaker Chisel
10. Ripping Chisel
11. Airline Coupling Screw Adaptor
1
2
3
4
5
6
8
9
7
10
03
Specification (continued)
Oiling the air tool
We recommend using air line oil to oil the air tool. This will help to maintain the tools best
performance. Please refer to the maintenance instructions below on how to oil the air tool.
Connecting to the air supply
ALWAYS
ensure the air supply is turned off before beginning.
1. Insert a few drops of air line oil into the air hammer through the air inlet before beginning.
2. Using the air inlet connect a suitable air hose. Make sure it is securely fitted.
3. Connect the other end of the hose to the air supply. Make sure it is securely fitted.
4. Turn on the air supply.
5. Before proceeding any further check for any air leaks. If the connection of the hose is not
secure you may find a leak. PTFE tape can be used to seal the connection. If leaks are found
they
need to be fixed before proceeding.
Operation
