Bluerock Tools CG-211Y, Руководство по эксплуатации, Страница: 9 / 16

C G - 2 1 1 Y T O R C H B U R N E R M A C H I N E
6
SETTING UP THE MACHINE
Ø Install the main spreader bar and the torch holder assembly.
o
Tighten the appropriate wing-nuts.
Ø Install the torch holder into the torch holder assembly.
o
Make certain the inside if the torch holder is clean and does not have any burrs. Also
make certain any tips you use are free or burrs or defect. It is important the seats are
tight.
§ See section below on “proper lighting of gas torch”
o
For straight cuts, ensure the torch holder is square (see figure below).