C G - 2 1 1 Y T O R C H B U R N E R M A C H I N E
2
Ø
DO shut off gas while changing cutting tips so as not to accidentally cause gas related
injuries.
Ø
DO ensure all tightening points, brackets, wing-nuts, and lever-bolts are tight and stable prior
to turning the machine on and/or starting the gas flame.
Ø
DO use a dust/fumes extraction system for cutting all materials. The operator should also
wear a protective respiratory device in accordance with welding safety standards.
Ø
DO NOT make adjustments to machine while the machine is running.
Ø
DO NOT remove or modify grounding plug. Only to be used on a properly grounded circuit.
Ø
DO NOT leave the flame running when not in use.
Ø
DO NOT hold the work piece by hand or using body. Always mechanically clamp or secure.
Ø
DO NOT allow flame too close to the machine body. This can cause machine components to
fail.
Ø
DO NOT allow flame to come in contact with power cords.
Ø
DO NOT operate machine outside of machine specifications.
Ø
DO NOT touch moving parts or cutting flame while the machine is running as death or
dismemberment could occur.
Ø
DO NOT stand under machine while running. The machine can fall and cause damage or
harm to the user.
Ø
DO NOT allow children or untrained personal to operate machine.
Ø
DO NOT use this machine in the rain or a wet environment. If using outdoors, make sure the
adhering surface is clean and dry.
Ø
DO NOT cut into steel that may contain a live electrical wire/circuit.