Blueprint Subsea Starfish 453OEM Скачать руководство пользователя страница 10

Страница: 10 / 28

StarFish 453OEM

System Manual

Using The Sonar

3.1.

Operation

Once the StarFish453 transducers and electronics module have been installed onto your platform, the system is
ready for use.

If this is

the first time you’re using the StarFish system, it is recommended you install the “Scanline” software

and

USB hardware drivers on your embedded PC before connecting the electronics module to it. Refer to the

accompanying “Scanline User Guide” for details on how to do this.

When using the StarFish453OEM system with “Scanline”, follow the connection and configuration instructions for

a StarFish 450 family device.

•

Switch the DC power on to the StarFish electronics module

•

When powered up, the

“Power/Status Indicator” will illuminate and start to flash –

indicating that the

Topside box has correctly initialised.

The “Activity Indicator” will not illuminate until the USB connection is made, Scanline is running and

configured correctly.

•

Start the Scanline software or your application. When the software opens the data connection to the

StarFish electronics and starts the sonar “pinging”, the “Activity Indicator” will start to flash.

3.2.

Software Development Kit

The StarFish Software Development Kit (SDK) can be downloaded from the Blueprint product website (see the

“Technical Support” section for details). The SDK contains the

software libraries, drivers, utilities and

documentation to help you :

•

Integrate the StarFish interface into your own application using the Windows API DLL.

•

Diagnose USB connection issues within the Windows operating system.

•

Diagnose operational issues with the StarFish hardware using the “StarFishTools” utility, including an

FFT spectral analyser mode to resolve electrical noise and interference issues.

Содержание Starfish 453OEM





























Результаты поиска

Содержание Starfish 453OEM

Отзывы:

Похожие инструкции для Starfish 453OEM

Бренды по названию

Популярные бренды

Blueprint Subsea Starfish 453OEM, Системное руководство

Результаты поиска

Содержание Starfish 453OEM

Отзывы:

Похожие инструкции для Starfish 453OEM

Бренды по названию

Популярные бренды