Page 5
www.bluenetvideo.com
BlueNet Video
888-616-1514
Quick Start
Please follow the steps below to complete the initial setup of the Network Video Server (NVS):
** Please do not power on the NVS until instructed
** Temporarily disable any proxy servers configured in Internet Explorer
** If connecting the NVS directly to a modem, power down and rest the modem. Leave the modem
powered down until configurations are finalized with the NVS and the NVS has been correctly
connected to the modem. Then power the modem, followed by the NVS.
1. You will need to access a PC/laptop and configure that PC in order to communicate with the NVS
2. Record the current TCP/IP properties of that PC (IP address, subnet mask, gateway, DNS, etc)
****If your PC obtains its IP address automatically, then no need to record any information.
3. Change the IP address of that host PC to 192.168.1.11 and subnet mask to 255.255.255.0 (leave all
other entries blank)
4. Connect the NVS to your PC’s Ethernet port via the supplied crossover cable (it does not matter
what end is used for the PC)
5. Power on the NVS using the supplied power adapter
6. After 1 minute of power, verify a solid POWER indicator, a flashing ACTIVE indicator, and a flashing
or solid 10M indicator.
7. After the corresponding indicator lights are proper, open Internet Explorer
8. Type - http://192.168.1.80 (default IP of the NVS) into your address bar.
9. Default ID/Password are both the word: admin
10. Familiarize yourself with the interface by viewing Section A: BlueNet Viewer Interface
11. Locate the TCP/IP configuration under Administration Tools
Supply the same ID and Password to enter Administration Tools (admin:admin)
12. Under “Network Type” select STATIC. You will only select Dynamic or PPPoE if you are
connecting the NVS directly to your cable/DSL/Broadband modem and your Internet Service
Provider is supplying you a dynamic or PPPoE address.
**** If have a network with other devices (such as PC/laptop, etc.) or a router, you will NEVER
select Dynamic or PPPoE. (PPPoE function currently unavailable, unless a router is used)