4
REMOTE CONTROL
Time/Light intensity up.
Hold for 2 seconds to turn ON the lighting.
Time/Light intensity down.
Hold for 2 seconds to turn OFF the lighting.
Changing time periods and set the correct time.
Adjusting light intensity (0-30) of the white and blue LEDs.
DISPLAY
Indication Daytime
Indication Sunrise or Sunset
Indication Dawn or Evening
Lighting off
Time
TIMER AND LIGHT INTENSITY SETTINGS
Setting the start time
1 Press , the display shows
o
o
oo
. Press / to set the time the lighting will be turned on, this is going to be the
time the Dawn begins (For a start time of 5 o’clock in the morning, the display will show
o
o
o5
).
2 Then press to set the duration of the Dawn Period.
Setting the duration and light intensity per time period
3 After pressing the , the display will show
1
o
oo
. Press / to set the duration of the Dawn. (For a duration of eg.
2 hours,
1
o
o2
will be shown on the display).
4 Press to set the light intensity throughout this period.
1A
will appear on the display for the white LEDS and
1
for the blue LEDs. The light intensity is indicated by the last two digits, between
oo
to
3o
. Increase or decrease the
level of light intensity by pressing / . By pressing on you switch between the two LED colours. Combine the
intensity of both colours to create a Dawn-light.
5 Then press to save the setting and to set the next period.
6 Repeat the previous steps until you have set all periods of time.
Indicates Dawn Period
Indicates Daytime Period
Indicates Sunset Period
Indicates Sunrise Period
Indicates Evening Period
Up
Time settings
Down
Light intensity
Instruction Manual
