Bluegrass Living 140349, Руководство владельца по эксплуатации и установке

Страница: 23 / 25

Problem: Burner will not light using igniter
Please review the Helpful Tips on page 15 for common fixes to th is problem.
Possible Cause 1: Electrode and burners are wet.
-
Please contact Living source to request the parts.
-
Wipe dry with cloth.
Possible Cause 2: Igniter battery is dead or backwards.
-
Check that the AA battery is inserted correctly in the igniter (see page 10) or
replace the battery. Make sure the plastic wrap on the battery has been removed.
Possible Cause 3: Igniter i
Pn cracked or broken - sparks a crack.
Possible Cause 1: No Gas Flow
-
Check if the LP gas tank is empty. If empty, replace and refill. If the propane tank is not empty,
refer to Problem: Sudden drop in gas flow on the following page.
Possible Cause 2: Coupling nut and regulator not fully connected.
Possible Cause 3: Obstruction of gas
fl
ow.
Possible Cause 4: Spider webs or insect nest in the venturi.
-
Clean the venturi.
Possible Cause 5: Burner ports clogged or blocked.
-
Reference Problem: Irregular flame pattern on the following page.
Clean the burner ports as described there.
Problem: Burner will not light with match
Problem: The fire table emits a lot of black smoke when in use
Possible Cause 1: Hose from gas
fi
re table is pinched.
-
Make sure the hose is not pinched between the fire table and
the source of the gas.
Troubleshooting
-
Turn the coupling nut about one half to three fourths a turn, until y ou feel a solid stop.
Do not use tools, tighten by hand only.
Venturi
-
Check for bent or kinked hose.
Possible Cause 4: Residue on Igniter Pin.
-
Check for residue on the igniter pin or Thermocouple.
If dirty,thoroughly clean the area.
www.bluegrassliving.com
23