Bluegiga DKBLE, Руководство пользователя

Страница: 7 / 21

Bluegiga Technologies Oy
Page 7 of 20
1.1 PIO Connections in the Carriers
FUNCTION BLE112 BLE113 BLE121LR
UART CTS P0_2
UART RTS P0_3
UART TX P0_4
UART RX P0_5
SPI CLK P1_3
SPI MISO P1_4
SPI MOSI P1_5
DISPLAY CS P1_6
FLASH CS P0_7
-
(pulled down in the
carrier)
ACCELEROMETER CS P1_2
DISPLAY RS / FLASH SUPPLY P1_1 P0_7
DCDC CNTRL P1_7 DCDC_CNTRL (*
LED / USB PU P1_0 -
POTENTIOMETER P0_6
BUTTON1 P0_0
BUTTON2 P0_1
BUTTON3 P2_0
*) Connect using a shorting link in the carrier
Table 1: PIO connections in the carriers
1.2 Important Notes about the Differences between the Module Carriers
In BLE121LR the PIOs P1_0 and P1_1 are reserved for the internal front end control of the module. Also
P1_7 is reserved for this purpose and in case of BLE121LR it can only be used as an output controlling the
external DCDC. Thus in BLE121LR P1_7 is named as DCDC CNTRL.
The important differences between the carriers are shown in the Figure 4 (BLE112 and BLE113 carriers) and
Figure 5 (BLE121LR carrier).