Bluegiga DKBLE, Руководство пользователя

Страница: 11 / 21

Bluegiga Technologies Oy
Page 11 of 20
Figure 8: Using the BLE Update Tool
2.2 Using the On-Board Debugger to Program External BLE Devices
Figure 9: Using the on-board debugger to program external BLE devices
2.3 Using the Analog Comparator of BLExxx modules
The analog comparator of BLE112, BLE113 and BLE121LR is fixed to the pins P0_4 (-) and P0_5 (+). The
pins overlap with the UART TX and RX signals in DKBLE. Thus to use the analog comparator the USB to
UART converter must be turned off. Refer to Bluetooth Smart Software API Reference for details about the
analog comparator configurations.
Switch power to
”USB” and the
debugger to
”OUTPUT”
Connect the ribbon cable from
the “DEBUGGER OUTPUT” to
the programming port of the
target device