Fig 2
Testing:
Test the light before installation ensuring that you use the correct voltage and the light is illuminated
correctly.
After installation ensure again that the light is illuminated correctly before the boat goes back into
the water and the lens label is removed.
After your boat goes back into the water check internally for water tightness around where the light
is installed.
The light has internal indicator Led’s for fault finding, these are as follows:
•
Over voltage will flash red.(check the voltage to the light)
•
Under voltage will show a constant red. (check the voltage to the light)
•
Over temperature will show amber.(allow the light to cool down and check if submerged)
