Fig 2 (Fuse connection)
Fig 3 (DMX Controller cable)
Fig 4 (DMX Interlink cable)
Fig 5 (DMX Terminator)
Fig 6 showing how the Gel connector is wired up.
Fig 7 showing how the finished Gel connector should look when finished.
Ensure that the black outer sheath is inside the gel connector.
The IP68 GEL CONNECTOR MUST BE INSTALLED CORRECTLY OR YOU WARRANTY WILL BE VOID.
Fig 1
Crimps for
positive
wires (ensure
that these
are mounted
into the
holder
before they
are crimped)
Heatshrink
for water
tight seal
to the fuse
holder
Image showing how to
wire the Gel Connector to
the light and Fuse holder
Please use fuse
instructions within the
manual to wire the fuse
Power
In
from
boat
power
Driver
cable
Fuse holder
Positive wire
from Driver
Negative wire
to boat power
in
Heatshrink
Please ensure
outer sheath is
inside the gel
box
