background image

English

                        Blue

Card

 

Solution 2: make sure the signal card was not read within 5 

seconds of the previous reading. (when you finished once reading, 

please position the card out side of the reading range of the 

reader.) 

Solution 3: the reader’s memory may be full. Connect with a PC to 

upload data before scanning more signal cards. 

Solution 4: the reader may run out of the battery, please change the 

battery 

Please contact with the technical support if you can not solve the 

problem by using above solutions. 

Failed to communicate with PC 

Solution 1: check to see if the PC software is opening properly, 

and whether it is set up to communicate with the BP-2002S. 

Solution 2: make sure that the BS-1000 wireless communication 

station is properly connected to the PC, and that it has been found 

by the PC software. 

Solution 3: check to see if the BP-2002S is placed properly on the 

BS-1000. The reading head of the BP-2002S should be between 

the status lights of the BS-1000, and its top should be flash against 

the inside edge of the BS-1000. 

Please contact with the technology support if you can not solve the 

problem by using above solutions. 

Failed to scan signal card, and failed to communicate with PC 

The reader may run out of the battery, please change the battery. 

Please contact with the technology support if you can not solve the 

problem by using above solution. 

The data has been successfully uploaded, but there is not data in Shift 

Report and Patrol Details 

If the data has been successfully uploaded, which could provide the 

reader is working properly. Please go to the “Basic Report” to 

inquiry the report. If the basic report can be generate properly, you 

could go to the “Reprocess” function to process the data and then 

inquiry the report in Shift Report and the Patrol Details. 

Failed to calibrate the reader clock 

Please initialize the reader and then calibrate the reader clock. 

IMPORTANT: initialization function will remove all of the records 

saved in the reader. 

 

 

Содержание BP-2002F













Отзывы: