BlueBox IDTRONIC HF, Руководство по протоколу связи

Страница: 27 / 37

BLUEBOX Gen.2 HFM Page 27 of 37
Byte Value Description Notes
1+1 0x.. Transponder UID, 1 st byte
1+i 0x.. Transponder UID, i th byte i < 8
1+8 0x.. Transponder UID, 8 th byte
If the command is not successfully executed, the answer is given in short form
through the ‘reply ack’ / ‘reply nak’ flags; otherwise, the BLUEBOX answers,
a) if the addressed transponder is not present:
Byte Value Description Notes
1 0x14 Command code
2 0x01 Status no transponder
b) if some error is occurred during the transaction:
Byte Value Description Notes
1 0x14 Command code
2 0x02 Status error
c) if the addressed transponder is present:
Byte Value Description Notes
1 0x14 Command code
2 0x00 Status ok block successfully locked
3 0x..
Info Flags: single bits are dedicated to
specify the presence of the following
fields (0

absent, 1

present):
•
Bit 7 … bit 4: not used
•
Bit 3: IC Reference (1 byte)
•
Bit 2: Memory Size (2 bytes)
• Bit 1: AFI (1 byte)
•
Bit 0: DSFID (1 byte)
4+1 0x.. Transponder UID, 1 st byte
4+i 0x.. Transponder UID, i th byte i < 8
4+8 0x.. Transponder UID, 8 th byte
... 0x.. DSFID
Present only if bit 0 of Info
Flags is set
... 0x.. AFI
Present only if bit 1 of Info
Flags is set