Setup
Network Settings:
The network settings page presents the user with remote access to configure active network ports
on the appliance.
By default the appliance ships with all ports set to DHCP.
The page will auto display all active network ports on the appliance and display the current settings
for each.
Pressing the “Edit” button for each of the ports will open a dialogue window which allows the user
to change the current settings. This includes both IP and DNS settings which can be DHCP or Static.
Click “Apply Changes” to set the configuration.
NOTE: when changing network settings on the appliance, you may be required to reload or refresh
the AWP browser page.
Video Wall Controller Series User Manual
Page
21
Copyright © 2020
