16
17
Air Intelligence Module Maintenance
Remove the module from the unit.
Use a vacuum cleaner to gently clean the
intake in front of the gas sensor.
Use a damp cotton swab to clean the dust
sensor lens. After cleaning the dirt off the lens,
use a dry cotton swab to wipe the lens. Do not
use alcohol to clean the lens.
Re-insert the module.
Air Intelligence
Module
By adding the Blueair Air Intelligence Module, the
Blueair Pro Series can continuously monitor and
report the surrounding air quality through state-
of-the-art particle and gas sensors. The unit can
also run on automatic mode, where the speed
is set according to the level of pollution the
sensors are detecting.
If you wish to upgrade your Blueair Pro unit
with an Air Intelligence Module, please visit
www.blueair.com to find your closest dealer.
Pull out the dummy cover sitting in
the module holder.
Insert the Air Intelligence Module into
the module holder.
Insert the filter pack and reattach the
intake door.
1
2
3
Remove the top filter pack, see Changing the Filter steps 1–4.
Dust sensor lens
Intake for gas sensor
