Page 10
3.0
How To Operate MD-3
MD-3
Control Panel - Button Operation
MD-3
Page 11
3.1 Menu Navigation
Use MENU button to enter menu for setting up pump.
Use UP or DOWN arrows to navigate through menu.
Active option appears on pump display in
text.
inverse
Plus symbol
+
signifies top of a menu tree. This means you can go further
within the menu.
Within the Menu of the pump, each screen you enter will have a title located
along the top. This will display the menu that is currently active, or this will be
the setting you are configuring.
To back out of menu, select
<- Esc
line located at end of the list. Then press
ENTER button. This will take you back one level.
When the menu list extends above or below height of display, a scroll bar will
appear on left side. Press DOWN arrow to scroll down to the end of the list to
see a list of all the available options.
Scroll bar example:
While making a selection where only one choice is allowed, you will see a radio
button.
Radio button example:
In a screen where you are making changes, you will see the word
Done
located at the bottom of the list. You must select
Done
in order to leave the
screen (whether you made a change or not). Selecting
Done
will take you back
to the parent level.
When inputting a numerical value, use UP or DOWN arrow to scroll through 0 -
9. To move over to the next digit use RIGHT arrow. If you pass your desired
digit, you can continuously press RIGHT arrow until you reach your desired
digit.
Numeric value example:
Solid black means item is selected
Outline with no fill means item is not selected
000
0
– Sample screen shots –
- Configuration
+ Display Language
<- Esc
+ Reset to Factory Defaults
+ Set Password
+ Display Rate
- Display Rate
Oz/min
Liter/Hr
Gal/Hr (US)
Gal/day (US)
Done
- Display Rate
%Speed
RPM
ML/min
Liter/Hr
Oz/min
- Menu
+ Configuration
+ Input Setup
+ Output Setup
<- Esc
+ Power Fail option
MD-3
Press and release
to select a Run
Mode.
Press and hold
to enter the
configuration menu for the currently
active run mode only.
Press and release
to prime the pump.
Press and release
to activate light.
Press and release
to enter the
configuration menus.
Press and release
to confirm a
menu selection.
Press and release
to view
revolution counter data.
Press and release
to select menu
items, increase menu values by one,
and increase pump output in
Manual
Speed Adjust
mode.
Press and hold
to increase values
progressively faster.
Press and release
to stop the pump.
Press and release
to select menu
items.
Press and release
(when not in the
configuration menu) to toggle the
display units of measure and to
display the current input signal
values
Press and release
to start the pump.
Press and release
to select menu
items, decrease menu values by one,
and decrease pump output in
Manual
Speed Adjust
mode.
Press and hold
to decrease values
progressively faster.
MODE
MD-3
MULTI-DIAPHRAGM
METERING PUMP
INFO
Press
and hold
for Setup
INFO
MODE
MD-3
MULTI-DIAPHRAGM
METERING PUMP
INFO
INFO
