Blue-White FLEXFLO A3 Series, Руководство по эксплуатации, Страница: 30 / 64

To Enable Frequency Output:
1
Open the App Drawer
2
Select Outputs
3
Select Frequency Output
4
Enable Frequency Output
5
Set Desired Values
6
Confirm by pressing Save
9.2 Frequency Output
This output sends a configurable high speed frequency signal. This feature can be used to
control other pumps (in sync / proportionally), data logging systems, and other external
devices for plant automation.
Four points on the slope must be defined:
1) a low Hz value
2) an output rate at the low Hz value
3) a high Hz value
4) an output rate at the high Hz value
Default settings: 0 Frequency (Hz) = 0 percent motor speed
1000 Frequency (Hz) = 100 percent motor speed
Option: Stop the pump and select the graph icon to easily adjust sliders to desired settings
Confirm by pressing “Save”
®
FLEXFLO A3
9.0 Output Setup
Page 30 Page 31 ®
FLEXFLO A3
9.0 Output Setup
To Enable 4-20mA Output:
1
Open the App Drawer
2
Select Outputs
3
Select 4-20mA Output
4
Enable 4-20mA Output
5
Set desired values for the four
points that is required.
6
Confirm by pressing Save
9.3 Set 4-20mA Output
This output sends a configurable 4-20mA. This feature can be used to control other pumps (in
sync / proportionally), data logging systems, and other external devices for plant automation.
Four points on the slope must be defined:
1) a low mA value
2) an output rate at the low mA value
3) a high mA value
4) an output rate at the high mA value
Default settings: 4mA = 0 percent motor speed
20mA = 100 percent motor speed
Option: Stop the pump and select the graph icon to easily adjust sliders to desired settings
Confirm by pressing “Save”