Blue-White FLEXFLO A3 Series, Руководство по эксплуатации, Страница: 26 / 64

To Prime The Pump:
1
Open the App Drawer
2
Select Prime
3
Select Start to Prime the pump
4
Pump will run at 100% motor
speed for sixty seconds
5
Pump will remain in Prime
Input
8.7 Prime
This mode allows the user to prime the pump at 100% motor speed for sixty seconds. After the
prime is complete the pump will remain in this mode ready to be primed again.
To exit: select another input method.
Page 26 ®
FLEXFLO A3
8.0 Input Setup
Page 27 ®
FLEXFLO A3
8.0 Input Setup
To Enable : Manual Cycle Adjust
1
Open the App Drawer
2
Select Manual Cycle
Adjustment
3
Select Settings to configure
Manual Cycle Adjustment
settings
4
Set Pump Speed
(0.04 - 100 percent)
5
Set Duty Time
(1 - 1,000,000 seconds)
6
Set Cycle Time
(1 - 1,000,000 seconds)
7
Confirm by pressing Save
8.8 Manual Cycle Adjust
This input mode allows the user to run the pump at a set motor speed (Pump Speed) for a set
amount of time (Duty Time) after which the pump will pause for a set amount of time (Cycle
Time). This cycle will repeat until the user presses the STOP button.
Default settings: Pump Speed = 100% Motor Speed
Duty Time = 1.5 Seconds
Cycle Time = 4.0 Seconds