![Blue-White FLEXFLO A1 Series Скачать руководство пользователя страница 20](http://html1.mh-extra.com/html/blue-white/flexflo-a1-series/flexflo-a1-series_operating-manual_2776990020.webp)
3. Stretch the tube slightly and insert the outlet (discharge) fitting into the upper retaining slot of the pump head.
Pull the outlet fitting out of the pump head.
12.3 Tube Installation
Page 20
®
FLEXFLO A1
NOTE
: Thoroughly clean the pump head and rotor. The rotor can be removed by pulling it straight out. After
cleaning, push the rotor back on the shaft.
1.
Set the motor speed to 10%.
Press the Start/Stop key to start the pump.
2. Insert the inlet (suction) side of the pump tube fitting into the lower retaining slot of the pump head. Carefully
guide the pump tube into the pump head.