Blue-White CHEM-FEED CD1 Series, Руководство по эксплуатации

Страница: 12 / 24

7.1 IO Connection
Risk of electric shock - All wiring must be insulated and rated 300V minimum.
WARNING
Page 12 CHEM-FEED CD1 Page 13
M12 Input Connector
P4
P1 P2
P3
P5
CHEM-FEED CD1
Pump (Right Side Panel)
Item Number Item
1 M12 Input Connector 1
2 M12 Input Connector 2 (Included with CD1V ONLY)
3 M12 Output Connector
4 USB-C Connector
1
3
2
M12 connectors not included with product.
Blue-White Industries recommends any A-Type M12 connector with 5 position female sockets
4
PIN Function Specifications Reference
P1 4-20mA Input (+)
120 Ohm Impedance, Non
powered loop
(+) Positive
P2 4-20mA Input (-)
120 Ohm Impedance, Non
powered loop
(-) Negative
P3 Not Used
P4 Not Used
P5 Not Used
PIN Function Specifications Reference
P1 Remote Start / Stop N.O. Dry Contact Closure
Open = Stop
Gnd = Run
P2 Ground DC Ground 0 VDC
P3 FVS (+) 15 VDC @ 60 mA To power FVS sensor
P4 FVS (-) DC Ground (0 VDC) FVS Ground Input
P5 FVS (Signal) Input Signal Input for FVS Signal
M12 Input Connector 1
M12 Input Connector 2 - Included with CD1V ONLY
M12 Output Connector
PIN Function Specifications
P1 Motor On Out (+)
SS(+) Contact Out
Solid State
P2 Motor On Out (-)
SS(-) Contact Out
Solid State
P3 N.O.
Relay Out, N.O. Contact
3 Amp @ 250 VAC
P4 COM Relay Out, COM Contact
P5 N.C. Relay Out, N.C. Contact