SkyLink Installation Guide v1.10
Page
25
of
29
© 2021 Blue Sky Network, All Rights Reserved
Step 4
– Attach Adapters
Listed below are the most common adapters that can be connected to your SkyLink device for additional
functionality:
•
USB Adapter
NOTE
: An FXS or FXO adapter needs to be plugged into the USB adapter in order to use a
POTS phone or phone system. Use an FXS adapter to connect a POTS phone to SkyLink and an
FXO adapter to connect a phone system.
•
RS232 Adapter
NOTE
: RS232 cables for SkyLink are proprietary and available only from Blue Sky Network. The
SkyLink RS232 cable kit comes with a DB9F connector and conforms to the RS232 standard
pinout for a DB9. Please contact
These will either be included in your kit, depending upon your selection, or can be purchased.
To attach the adapter, remove the connector cap from the connectivity port located on the bottom panel
of the unit. Connect the cable into the port and the adapter into the appropriate device (e.g., modem,
POTS adapter, etc.).
Step 5
– Complete Setup
Congratulations on successfully installing your SkyLink device! To complete the unit setup, including
configuring your settings, please see the SkyLink User Guide.
