SkyLink Installation Guide v1.10
Page
19
of
29
© 2021 Blue Sky Network, All Rights Reserved
EQUIPMENT SETUP
Step 1
– Install Cellular & Iridium SIM Cards
NOTE
: If you purchased your SkyLink device through Blue Sky Network, the unit will come with cellular
and Iridium SIM cards already installed.
To install your cellular and Iridium SIM cards:
1. Carefully remove the entire bottom panel of the unit by unscrewing the Phillips screw on each
side of the panel.
2. Insert SIM cards located behind connectivity port, taking care to ensure wires remain tucked in.
NOTE
: A micro SD slot is also present behind the connectivity port. Ensure that the SIM
cards are placed into the correct holders and not the micro SD slot. If the device does not
work after installing the SIM cards, they may be in the wrong slots.
3. Re-attach bottom panel by re-screwing Phillips screws.
