Blue Seal SMW 15, Инструкция по эксплуатации и техническому обслуживанию

Страница: 14 / 19

14
SMW 15
TROUBLESHOOTING
PROBLEMS
The machine fails to turn on.
The machine does not fill with
water.
Insufficient washing.
Insufficient rinse.
CAUSES
Main switch disconnected.
Water cock shut.
Dirty fill pipe filter.
Rinsing nozzle clogged.
Overflow pipe not well
connected.
Wrong pump rotation direction.
Clogged washing nozzles.
Dirty washing filter.
Clogged washing blade.
No detergent.
Machine not in temperature
(Green light (3) Fig. 8)
Insufficient washing conditions.
Clogged rinsing nozzles.
Clogged boiler by limestone.
Low main pressure
(less than 2 bar. - 200 Kpa).
Insufficient temperature.
Bad location of the nozzles or
damaged nozzles.
SOLUTIONS
Turn on the switch.
Turn on the clock.
Detach the fill pipe (13 Fig. 6) and clean the filter
(15).
Unscrew and clean the nozzles (A Fig. 9) under
running water.
Check the right connection of the overflow pipe (23
Fig. 9)
Call the technician to reverse 2 of the 3 wires on
the main switch.
Clean the washing blade (25 Fig. 9).
Clean the filters (22 e 24 Fig. 9).
Remove and clean the balde (25 Fig. 9)
Add detergent and fill the dispenser.
Wait the green fixed light (3) Fig. 8.
Check the correct washing phase.
Unscrew and clean the nozzles (A Fig. 9) under
running water.
Call after-sales service.
Wait pressure recovery or purchase a new
pressure pump.
Call after-sales service.
Check the right location of the nozzles and replace
damaged ones.
ENGLISH