4
Cleaning / Maintenance
12
© Moffat Ltd, January 2007
Revision 1/
Blue Seal Evolution Series Gas Griddles
CAUTION:
Always turn off the gas supply before cleaning.
This unit is not water proof.
Do not use water jet spray to clean interior or exterior of this appliance.
Routine Maintenance
To achieve the best results cleaning must be regular and thorough and all controls and mechanical
parts checked and adjusted periodically by a competent serviceman. If any small faults occur, have
them attended to promptly. Don't wait until they cause a complete breakdown. It is recommended
that the appliance is serviced every 6 months.
Clean the griddle regularly. A clean appliance looks better, will last longer and will perform better.
Carbonised grease on the surface or on the griddle plate will hinder the transfer of heat from the
cooking surface to the food. This will result in loss of cooking efficiency.
NOTE: Each griddle is supplied with a scraper tool and a pack of blades for cleaning the griddle
surface. Griddles with both ribbed and flat surfaces are supplied with two scraper tools and
two packs of blades for use with both flat and ribbed surfaces. These are for use with both
chromed and steel surfaced griddles. NEVER use the ribbed scraper blade on the flat
chrome surfaced griddle plate.
DO NOT use water on the griddle plate while this item is still hot as warping and
cracking may occur. Allow the griddle plate to cool down before cleaning.
NOTE:
•
DO NOT use abrasive detergents, strong solvents or caustic detergents as they could cor-
rode or damage the range.
•
In order to prevent the forming of rust on the griddle plate (Steel Plate), ensure that any
detergent or cleaning material has been completely removed after each cleaning. The ap-
pliance should be switched on briefly to ensure the griddle plate becomes dry. Oil or
grease should be spread over the griddle surface in order to form a thin protective greasy
film.
To keep your griddle clean and operating at peak efficiency, follow the procedures shown below:-
After Each Use
1.
Clean the griddle with the supplied scraper tools to remove any food debris.
2.
Always ensure that the scraper tool blades are changed regularly to ensure that the scraper tool
works efficiently and prevents damage to the griddle plate surface.
WARNING
T
HE
BLADES
FITTED
TO
THE
SCRAPER
TOOL
ARE
EXTREMELY
SHARP
AND
ARE
TO
BE
USED
WITH
CARE
.
CAUTION
Always ensure that an even pressure is applied over the whole surface of the
scraper tool when using on the flat chromed surface of the griddle, to prevent
scoring of the surface.
NEVER bang the sharp edge of the scraper tool on the flat chromed surface of
the griddle as this will damage the chrome finish and invalidate the warranty.
