Blue Seal Evolution Series, Инструкция по установке и эксплуатации

Страница: 7 / 29

5
Specifications
- All Other Markets
(*) NOTE:

(*) Measure burner operating pressure at at gas valve outlet test point with burner
operating at 'High Flame' setting.

NAT, LPG & Butane Only - Operating pressure is ex-factory set and is not to be adjusted,
unless when converting between gases, if required.

(**) TOWN GAS Only - Adjust burner operating pressure using adjustable gas regulator
supplied.

Refer to ‘Gas Conversion and Specifications' section in this manual for further details.
Gas Connection
Bench Models
Gas supply connection point is located at rear of appliance, approximately 130mm from right hand
side, 32mm from rear, 55mm from floor and is reached from rear of appliance. (Refer to
‘Dimensions’ section).
Connection is
¾"
BSP male (For all other models).
All Other Models
Gas supply connection point is located at rear of appliance, approximately 130mm from right hand
side, 32mm from rear, 655mm from floor and is reached from beneath appliance. (Refer to
‘Dimensions’ section).
Connection is
¾"
BSP male (For all other models).
Natural Gas Town Gas (**)
GP8450 GP8600 GP8900 GP8120 GP8450 GP8600 GP8900 GP8120
Input Rating (N.H.G.C.) 40 MJ/hr 53 MJ/hr 80 MJ/hr 108 MJ/hr 40 MJ/hr 53 MJ/hr 80 MJ/hr 108 MJ/hr
Supply Pressure 1.13 - 3.40 kPa 0.75 - 1.50 kPa
Burner Operating Pressure (*) 0.90 kPa 0.85 kPa 0.90 kPa
Gas Connection ¾” BSP Male
0.45 kPa
LP Gas (Propane) Butane
GP513 GP514 GP516 GP518 GP513 GP514 GP516 GP518
Input Rating (N.H.G.C.) 40 MJ/hr 53 MJ/hr 80 MJ/hr 108 MJ/hr 40 MJ/hr 53 MJ/hr 80 MJ/hr 108 MJ/hr
Supply Pressure 2.75 - 4.50 kPa 2.75 - 4.50 kPa
Burner Operating Pressure (*) 2.6 kPa 2.5 kPa 2.6 kPa 2.6 kPa 2.5 kPa 2.6 kPa
Gas Connection ¾” BSP Male