13
Cleaning and Maintenance
General
Clean the Target Top regularly. A clean appliance looks better, will last longer and will perform
better. Carbonised grease on the cooking surface will hinder the transfer of heat from the cooking
surface to the food. This will result in loss of cooking efficiency.
DO NOT use water on the Target Top while this item is still hot as warping and cracking
may occur. Allow the Target Top to cool down before cleaning
.
NOTE:
•
DO NOT use abrasive detergents, sharp scrapers, strong solvents or caustic detergents as
they could corrode or damage the Target Top / Range.
•
In order to prevent the forming of rust on the Target Top, ensure that any detergent or
cleaning material has been completely removed after each cleaning. The appliance should
be switched on briefly to ensure the Target Top becomes dry.
To keep your Target Top clean and operating at peak efficiency, follow the procedures shown
below:-
After Each Use
Clean the Target Top with a stiff nylon brush or a flexible spatula to remove any build up of carbon.
Daily Cleaning
1.
Thoroughly clean the splash back, the interior and exterior surfaces of the Target Top / Range with
hot water, a mild detergent solution and a soft scrubbing brush.
2.
Brush the Target Top (cast iron) with a soft bristled brush followed by wiping with a cloth to prevent
accumulation of carbon.
3.
Remove the drip tray and clean with a mild anti bacterial detergent and hot water solution using a
soft bristled brush. Dry the drip tray thoroughly with a dry cloth.
4.
Dry the Target Top / Range thoroughly with a dry cloth and polish with a soft dry cloth.
Weekly Cleaning
NOTE:
•
If the Target Top / Range usage is very high, we recommend that the weekly cleaning
procedure is carried out on a more frequent basis.
•
Ensure that protective gloves are worn during the cleaning process.
•
DO NOT use harsh abrasive detergents, sharp scrapers, strong solvents or caustic
detergents as they will damage the Target Top / Range.
•
DO NOT use water on the Target Top / Range while it is still hot as warping may occur.
Allow the castings to cool down before cleaning.
Target Top
a. This should be kept clean of any build up of spillage’s of food. Provided the cast iron work
surface is regularly used it will maintain itself in good condition with no special cleaning
requirements being necessary.
b. Clean any food residue and spillage from the channels around the centre casting and main plates
before use.
C
AUTION
:
Always turn 'Off' the gas supply before cleaning.
This appliance is not water proof.
Do not use water jet spray to clean interior or exterior of this appliance.
Содержание Evolution G570
Страница 7: ...5 Dimensions G570 ...
Страница 25: ......