-23-
Revision 3/F3601
6.3.9 GRIDDLE BURNER PILOT
THERMOCOUPLE
6.3.10 GRIDDLE BURNER PIEZO IGNITOR
1) Remove control panel (refer 6.2.1).
2) Undo nut securing piezo ignitor from rear
of control panel.
1) Remove griddle burner (refer 6.3.5).
2) Remove heat shield (refer figure 6.3.6).
3) Unscrew the pilot thermocouple from the
pilot burner assembly.
Pilot
thermocouple
Figure 6.3.13
4) Undo thermocouple from griddle gas
control.
Thermocouple
Figure 6.3.14
5) Replace and reassemble in reverse order.
IMPORTANT:
WHEN SCREWING
THERMOCOUPLE BACK INTO GAS
CONTROL, ONCE THREADED UP,
TIGHTEN UP ANOTHER ¼ TURN ONLY.
DO NOT OVER TIGHTEN.
6.3.11 GRIDDLE BURNER H.T. LEAD
3) Remove H.T. lead from piezo ignitor.
4) Replace and reassemble in reverse order.
Figure 6.3.13
Piezo
nut
1) Remove control panel (refer 6.2.1).
2) Remove H.T. lead from piezo ignitor and
pilot electrode.
Pilot
electrode
Figure 6.3.14
3) Replace lead and reassemble in reverse
order.
1) Remove fat collection trays.
2) Remove griddle plate.
3) Remove control panel (refer 6.2.1).
4) Disconnect piezo H.T. lead from piezo
ignitor.
5) Unclip and remove front heat shield (refer
figure 6.3.6).
6) Slide reflector panel forward and lift away
at rear.
7) Undo pilot supply and disconnect pilot
thermocouple from gas control.
6.3.12 GRIDDLE BURNER GAS CONTROL
