Outdoor Charcoal Grill Model No. NPC1827BLN
Contact 1.800.762.1142 for assistance. Do not return to place of purchase.
page no.
4
Step
7
Attach bottom bowl
Attach bowl to cart frame using 4 sets of medium screws (B), large lock washers
(L), and large washers (I).
B
L
I
B
L
I
Step
8
Attach charcoal support rods and adjustable knob
A. Attach adjustable knob to bottom bowl using 2 sets of small screws (A), heat
resistant washers (J), small washers (H), small lock washers (K), and cap nuts (E).
Note:
Insert tabs on top of adjustable knob into bottom bowl.
B. Insert charcoal support rods into bottom bowl.
C. Insert end of charcoal support rods into slots on side of adjustable knob.
E
K
H
J
A
Step
9
Attach top lid and ash receiver
A. Insert the top hinges into the bottom hinges. Secure with 2 pins (M) and 2 cotter
pins (N).
Note:
If top hinge does not fit into the bottom hinge, gently squeezetop hinge tabs
together.
B. Slide ash receiver onto slide from backside.
M
N
N
M
4
Step
10
Insert warming rack
A. Slide warming rack into holes in lid and bottom bowl.
Note:
Look for corresponding holes on side of lid. Insert short wire ends into lid
holes, one side at a time. Position warming rack legs into slots on grill body sides.
B. Cut zip tie on warming rack.
1
Step
11
Insert charcoal grid and cooking grid
Step
12
Completed
Congratulations your assembly is now complete. Read Operating Instructions
before proceeding.
