9
To operate, you will need one precision-filled standard grill LP gas tank with external valve threads .
20 lb
9 Kg
17.9 in.
/ 45.5 cm
12.2 in. / 31 cm
Securing LP Gas Tank
Secure tank by sliding the tank retainer wire over shoulder of LP gas tank .
Inserting LP Gas Tank
Place precision-filled LP gas tank upright into the notches in
the right cart frame so the tank valve is facing the gas line connection .
Connecting LP Gas Tank
1 . Before connecting, be sure there is no debris
caught in the head of the LP gas tank, head of
the regulator valve or in the head of the burner
or burner ports .
2 . Connect regulator/hose assembly to tank by
turning knob clockwise until it stops .
Disconnecting LP Gas Tank
1 . Before disconnecting, make sure the LP gas tank
valve is “CLOSED .”
2 . Disconnect regulator/hose assembly from LP gas
tank by turning knob counterclockwise until it is
loose .
W
CAUTION: LP gas tank must be properly
disconnected and removed prior to
moving this grill.
3 . Place the protective cap cover on the LP tank and
store the tank outdoors in a well ventilated area out
of direct sunlight .
Checking for Leaks
Burner Connections
1 . Make sure the regulator hose and valve connections are securely fastened to the burner
and the tank .
2 . Visually check the connection between the burner/venturi tube and orifice .
3 . Make sure the burner/venturi tube fits over the orifice .
W
WARNING: Failure to inspect this connection or follow these
instructions could cause a fire or an explosion which can cause death,
serious bodily injury or damage to property.
4 . Please refer to diagram for proper installation (Figure 1) .
5 . If the burner/venturi tube does not rest flush to the orifice, as shown,please contact
1 .800 .694 .0013 for assistance .
Tank/Gas Line Connection
1 . Make 2-3 oz . of leak detection solution by mixing one part liquid dishwashing soap with
three parts water .
2 . Make sure control knobs are in the “ OFF” position (Figure 2) .
3 . Connect LP gas tank per “Installing LP Gas Tank” section .
4. LP:
Turn LP gas tank valve to “OPEN .”
NG:
Turn “ON” natural gas main valve .
Figure 1
LP Gas Valve
with Orifice
Valve
Soft Pipe
Connection
Burner/
Venturi
Tube
Figure 2
OFF
Figure 3
X
X
X
X
X
Installing LP Gas Tank
.
W
LP gas tank must be properly disconnected and
removed prior to moving this grill.
CAUTION
Getting More Propane
Need a tank of gas? One option is to try propane exchange . It’s easy, fast, safe, and available
at tens of thousands of conveniently located retail outlets nationwide, which are typically
open nights and weekends . You can purchase a fresh, precision-filled tank or exchange your
empty for a fresh, precision-filled tank . Another option is to have your tank refilled at a refill
station . Be sure to check the hours of operation for the refill station .
Installing Natural Gas Line
Installation should be done by a qualified service person .
W
CAUTION: If young children are in the area, a locking valve should be considered.
Connecting Natural Gas Line
1 . Before connecting, be sure there is no debris caught in the head of the natural gas line, head of the grill natural gas line or in the head of the
burner or burner ports .
2 . Connect grill natural gas line to natural main gas line .
Disconnecting Natural Gas Line
1 . Before disconnecting, make sure the natural gas main line valve is “OFF .”
2 . Disconnect grill natural gas line from natural gas main line .
X
X
Operating Instructions
