1. Using a 12MM socket remove the four (4) bolts, two (2) per side, from the belly pan
and set aside for reinstalling after baseplate installation.
NOTE:
Some models may
not have a belly pan.
2. On 2011-2012 models only, locate the frame extension, remove the bolt using a
12MM socket and slide outer tube out. The outer tubes will not be reinstalled.
3. Locate the frame extension, with a reciprocating saw remove the end portion of the
cross member slightly so it is flush with the tab. Be sure to paint edges with a high
quality paint in order to prevent rusting.
BX3763
2005-2015 Toyota Tacoma
(Includes Prerunner)
Installation Instructions
292-2737 Rev. J
Page 5 of 10
11/19/14
PS
DS
PS
DS
PS
DS
