BX3763
2005-2015 Toyota Tacoma
(Includes Prerunner)
Installation Instructions
292-2737 Rev. J
Page 2 of 10
11/19/14
Removable Tabs: Motorhome mount tow bars are recommended for use with this baseplate. Due
to the design of the removable tabs the RangeFinderII and Ambassador tow bars can not be used.
Adapters, except the BX8833 and BX88151, can not be used with this baseplate.
Instruction Notes: The fascia is removed and reinstalled for the baseplate installation. Some drilling
and trimming is required.
The dimensional variations between otherwise identical vehicles can be considerable. While the
baseplate was designed for easy installation, it may be necessary to tailor the baseplate slightly to
compensate for vehicle manufacturer’s tolerances. These minor adjustments may include filing a hole
slightly, bending electrical rods or bending end plates.
The BX8869 Tail Light Wiring Kit is recommended for this vehicle. Location for the BX8869 is on the
driver's side tail light assembly.
NOTICE
• Handling of some cosmetic parts when installing this product may require the use of protective
covers, rags, specialty tools, etc. to prevent damage.
• When using power drills be aware of the dangers of torque and drill bit length.
• Be sure that ALL electrical connections are plugged in properly and functioning before
installing the fascia
.
• Do not use the towed vehicle for storing luggage, equipment, etc. This may cause you to
exceed the towing capacity of the tow bar, baseplate, and its accessories.
• Be sure to use Loctite
®
Red on all bolts before tightening. Tighten all bolts according to the
torque chart provided.
