Blue Giant EPJ-40, Руководство пользователя

Страница: 43 / 124

B
G-D40-0131
5-7
5. Feed the cable through cover (1, Figure 5-5 ) and
position cover (1) on the frame. Secure with two
screws (4) and two washers (5).
6. Install cap (4) on cable (3) and position the cap on
cover (1).
7. Turn on key switch (21, Figure 12-20 ) and emer-
gency disconnect (2, Figure 12-19 ).
5-3. STEERING ARM
5-3.1. Return Spring Replacement.
The steering arm gas return spring (3, Figure 5-1 ) is
replaced while the steering arm (2) is in the upright
position.
1. Secure steering arm (2) in the upright position.
2. Remove screw (4) and free the gas return spring
(3) from bracket (17).
3. Pull downward on gas return spring (3) to free it
from its seat inside steering arm (13).
4. Position the new gas return spring (3) inside the
steering arm being sure it fully engages its seat.
5. Position the opposite end of gas return spring (3)
on bracket (17) and install screw (4).
5-3.2. Steering Arm Removal.
1. Remove steering arm gas return spring as
described in paragraph
5-3.1.
2. Disconnect harness (15, Figure 5-1 ) from harness
(3, Figure 12-21 ).
3. Attach a hoist to steering arm (2, Figure 5-1 ).
4. Remove shaft (5) and the steering arm (2).
5-3.3. Steering Arm Installation.
1. Position steering arm (2, Figure 5-1 ) over bracket
(17) and secure with shaft (5).
2. Reconnect harness (15, Figure 5-1 ) to harness (3,
Figure 12-21 ).
3. Install steering arm gas return spring as described