Blue Giant EPJ-40, Руководство пользователя

Страница: 26 / 124

4-6 B
*'
Table 4-2 Set Options - Continued
Parameter Factory Setting Description
SET INPUT #2 PRESENT It can be can be set as:
• PRESENT: CNA#14 (
Table 4-5 ) is managed as a cutback speed
input (SR#2).
• OPTION #1: CNA#14 ( Table 4-5 ) is managed as an inching back-
ward.
The input CNA#14 ( Table 4-5 ) can only be used as Aux Lifting
request when the MDIPRC is PRESENT.
This input must be connected to a Keyswitch controlled voltage.
The SR#2 becomes active when CNA#14 (
Table 4-5 ) is open.
The inching backward becomes active when the CNA#14 ( Table 4-
5 ) is closed to a Keyswitch controlled voltage.
SET INPUT #4 OPTION #1 This option handles the digital input CNB#7 ( Table 4-5 ). It can be
can be set as:
• BELLY CNB#7 ( Table 4-5 ) is managed as a Belly Switch input.
• BRAKE CNB#7 ( Table 4-5 ) is managed as service brake input.
This information can be used also to recognize when the operator
is driving with a pressed pedal braking.
• EX.HYDRO: CNB#7 ( Table 4-5 ) is managed as Exclusive Hydro.
This input must be connected to a Keyswitch controlled voltage.
The Belly switch active level is specified on the QUICK INV LOGIC
below.
The service brake of the exclusive hydro becomes active when
CNB#7 is opened.
HOUR COUNTER RUNNING This option specifies the hour counter mode. It can be set as:
• RUNNING: The counter registers travel time only.
• key on: The counter registers when the keyswitch is closed.
BATTERY CHECK Level = 1 This option specifies the handling of the low battery charge detec-
tion. It can be set as:
• Level 0: Nothing happens, the battery charge level is ignored.
• Level 1: A BATTERY LOW alarm is raised when the battery level
is calculated being less than 10% of the full charge. A BATTERY
LOW alarm inhibits the Lifting function.
• Level 2: A BATTERY LOW alarm is raised when the battery level
is calculated being less than 10% of the full charge. A BATTERY
LOW alarm reduces the maximum truck speed down to 24% of
the full truck speed then, if the MDI-PRC is absent, inhibits the Lift-
ing function.
• Level 3 Equivalent to Level 1; a BATTERY LOW alarm is raised
when the battery level is calculated being less than 10% of the full
charge. A BATTERY LOW alarm inhibits the Lifting function.
HYDRO KEY ON OFF ON/OFF: If this options is programmed ON the traction Inverter
manages a hydraulic steering function when the keyswitch is
switched ON (only if the AUX OUTPUT #1 option is programmed
as HYDRO CONTACT or as WXCLUSIVE HYDRO).
STOP ON RAMP OFF Not used.