Blue Giant BG E-Step, Руководство пользователя

Страница: 19 / 50

SECTION 6
LOAD WHEEL, CASTERS
6-1. LOAD WHEEL.
6-1.1. Removal
1. Engage the emergency power disconnect switch
and turn off key switch.
2. Block the drive wheel to prevent the vehicle from
rolling.
3. Jack up the vehicle to raise the load wheels off
the floor. Securely block the vehicle in the raised
position by positioning supports under both fork
tips.
4. Remove the compartment cover as described in
paragraph
4-1.1.
5. Remove the screws and cover inside the unit.
6. Remove the axle.
7. Remove the load wheel.
8. Remove bearings from load wheel.
9. Inspect bearings and replace if necessary.
6-1.2. Installation
1. Pack bearings with grease.
1. Reassemble bearings in load wheel.
2. Position load wheel on the axle and install two
bolts, two lock washers and two flat washers.
3. Install cover and secure with the screws.
4. Remove the blocking from under the vehicle and
lower it to the ground.
5. Disengage the emergency power disconnect
switch and turn on key switch.
6-2. CASTER.
1.
Engage the emergency power disconnect switch
and turn off key switch.
2.
Jack up the vehicle to gain access to the caster;
then securely block the vehicle to prevent
movement.
3.
Remove four screws, four lock washers and four
flat washers.
4.
Remove caster.
5.
Install new caster in reverse order of removal.
19