5
Blue Diamond® Attachments
2. Safety
2.2
Safety Decals
The safety decals existing on the attachment
should be clearly readable and always followed.
The location of the decals is shown in the parts
diagram. Replace any safety decal that is missing
or damaged.
The READ MANUAL decal warns the operator to
read this manual before operating the attachment.
The FLYING OBJECTS decal warns the operator
the operator and bystanders to stay away during
operation.
The INJECTION HAZARD decal warns the operator
and bystanders to stay away during operation.
The CRUSHING HAZARD decal warns the operator
and bystanders to stay away during operation.
Before operating this equipment, read and
understand the following safety information. Each
individual working with the equipment should be
familiar with the safety precautions.
Failure to follow the safety procedures before
cleaning, adjusting, lubricating, or servicing this
unit could result in serious injury or death.
Before cleaning, adjusting, lubricating or servicing
this unit, Always follow the MANDATORY SAFETY
SHUTDOWN PROCEDURE:
1. Lower loader arms and roll attachment forward
until it is flat on level ground.
2. Apply loader parking brake and stop the loader
engine.
3. Cycle controls to relieve pressure within the
auxiliary hydraulics lines.
4. Remove loader key and keep with you while
working on the attachment.
5. Disconnect auxiliary hydraulic lines from
loader.
Get on or off the loader only at locations equipped
with hand holds and steps. Keep the steps and
hand holds clean and inspect for damage. Make
necessary repairs.
Maintain 3 point contact and face the loader and
attachment when mounting or dismounting.
DO NOT get on a moving or operating broom
or attachment. NEVER jump on or off a running
attachment or loader.
WARNING
WARNING
