Blue Diamond Mini Pickup Broom Скачать руководство пользователя страница 4

Blue Diamond® Attachments

4

This 

SAFETY ALERT SYMBOL

 identifies important 

safety messages on the equipment and in the 

owner’s manual. When you see this symbol, be 

alert to the possibility of personal injury and 

carefully read the message that follows.

The signal word 

DANGER

 on the machine and in 

the manuals indicates a hazardous situation which, 

if not avoided, will result in death or serious injury.

The signal word 

WARNING

 on the machine and 

in the manuals indicates a potentially hazardous 

situation which, if not avoided, could result in 

death or serious injury.

The signal word 

CAUTION

 on the machine and 

in the manuals indicates a potentially hazardous 

situation which, if not avoided, may result in minor 

or moderate injury. It may also be used to alert 

against unsafe practices.

The signal word 

IMPORTANT

 identifies procedures 

which must be followed to avoid damage to the 

machine.

Safe Operation Needs a Qualified Operator

AVOID SERIOUS INJURY OR DEATH

Operators must receive instructions before 

operating the machine. Untrained operators can 

cause serious injury or death. For an operator 

to be qualified, he or she must not use drugs 

or alcoholic drinks which impair alertness or 

coordination while working. An operator who 

is taking prescription drugs must get medical 

advice to determine if he or she can safely 

operate a machine and the equipment.

Operator Training

•  Check the rules and regulations at your 

location. The rules may include an employer’s 

work safety requirements. Regulations may 

apply to local driving requirements or use 

of a Slow Moving Vehicle (SMV) emblem. 

Regulations may identify a hazard such as a 

utility line.

•  The new operator must start in an area without 

bystanders and use all the controls until he or 

she can operate the machine safely under all 

conditions of the work area.

2. Safety

2.1 

General Safety Information

SAFETY ALERT SYMBOL

DANGER

WARNING

CAUTION

IMPORTANT

WARNING

Содержание Mini Pickup Broom

























Отзывы: