PROCEDURE: Clean Coffee Brewer
PRECAUTIONS: Press POWER key to OFF.
Allow brewer to cool.
FREQUENCY: Daily
TOOLS:
Mild Detergent, Clean Soft Cloth or Sponge
Bristle Brush
1. Disconnect brewer from electric power.
Allow brewer to cool.
2. Remove servers.
3. Remove and empty brew baskets.
4. Remove spray disks and gaskets from spray heads
5. Wipe inside of spray head and area around spray head with a
soft clean cloth or sponge moistened with clean water.
6. Wash spray disks in a sink using warm water and a mild
detergent. A bristle brush may be used to clear clogged
spray holes. Rinse spray disks with clean water and allow to
air dry.
7. Wash brew baskets in a sink using warm water and a mild
detergent. A bristle brush may be used to clean around the
bypass diverters. Rinse with clean water and allow to air dry.
Be sure bypass diverters are properly installed.
8. Wipe exterior of brewer and servers with a soft clean cloth or
sponge moistened with clean water.
9. Reinstall gaskets INSIDE brew heads, and then reinstall
spray disks.
10. Reinstall brew chambers.
11. Reinstall servers.
Procedure is complete
CLEANING INSTRUCTIONS
10
CLEANING INSTRUCTIONS
CAUTION:
BURN HAZARD
Brewing and serving
temperatures of coffee are
extremely hot.
Hot coffee will cause serious
skin burns.
IMPORTANT:
DO NOT use steel wool, sharp
objects, or caustic, abrasive or
chlorinated cleansers to clean
the brewer, brew baskets or
servers.
DO NOT
immerse or submerge
satellites in water.
655 2M-Z17970 Owners Manual E-Maxl Thermal Brewer
BREW
HEAD
SPOUT
INSERT
SPRAY HEAD
GASKET
SPRAY
DISK
LIFT EARS UP
TURN LEFT
TO REMOVE
IL2724
