11
655 2M-Z17970 Owners Manual E-Maxl Thermal Brewer
655 2M-Z17970 Owners Manual E-Maxl Thermal Brewer
OPERATING (continued)
8. Clock
A. Time – Battery Backup.
The E-Max T has a battery backup system which will maintain the proper
time during power failures, or when the brewer is unplugged (even for very prolonged periods of time).
Normally there will not be a need to set the time except for Daylight Saving Time changes, or moving the
brewer to different time zones.
B. Changing Day and Time:
To change time, turn the E-Max T off. Press the 2nd key twice followed by
the 1st key twice to access the time change mode, (i.e. press CANCEL, CANCEL, BREW, BREW). In
the time change mode the screen will read “Day:” followed by the current day setting. Use the 6th key
to advance the day, or the 5th key to reverse. When day has been properly set, press the 3rd key. The
screen will now read “Time:” with the set time on the screen, the hour and am or pm flashing. Use the
5th key to go back or the 6th key to advance the hour, making sure that the am or pm is correct. When
the hour and am/pm is correctly set, press the 3rd key, and the screen will read “Time:” with the set time
on the screen, minutes flashing. As previously use the 5th or 6th keys to adjust the minutes, and press
the 3rd key when complete. E-Max T will return to the off mode. (Changing time can also be done in the
regular programming mode. Consult the E-Max
Programming Manual
)
C. After Hours: Consult the E-Max Programming Manual to set the After Hours mode. The factory
programming has the After Hours mode turned OFF. The After Hours can be programmed to come on
from 1 to 6 hours after the last brew. When the E-Max T goes into the After Hours mode, the water in the
tank will be allowed to drop from the normal brewing temperature and will reheat less frequently – this
feature saves energy and extend component life. While in the After Hours mode, the power light will
flash continuously. When the BREW switch is pressed the E-Max T automatically reverts back to normal
operation, heating the water to the Precise Temperature for Brewing (PTB), before starting the brew.
(The power light will be on continuously and the Brew light will flash until the correct water temperature is
reached.)
9. Countdown Quality Timer:
Refers to coffee warmers, not applicable for Thermal Brewers.
10. Pulse or Pre-Infusion Volume Options:
To set these features, refer to E-Max
Programming Manual, Brew Settings Menu. If
a particular brew volume has utilized the pulse
or pre-infusion option, that volume will be
displayed with an asterisk (*) after the volume.
As an example
“Volume#2 3 G*”
would
indicate that the second programmed brew
volume has utilized the pulse or pre-infusion
program options.
11. Keypadlock:
This feature is OFF in the
standard factory settings. To set the feature
refer to E-Max Programming Manual, Machine
Settings Menu. If the Keypadlock feature is
activated, there will be no response by the
brewer when the keys are depressed (except
for the beep after a key is depressed). To
temporarily “unlock” the keypad, press and
hold the CANCEL key for 6 seconds. A beep
will be heard indicating the keypad is now
“unlocked”, — a brew can be initiated, warmer plates turned on or off, etc. The keypad will remain
unlocked until the brew is completed, then automatically return to keypadlock mode. If a brew is not
initiated 60 seconds after “unlocking”, the system will time out and return to the “locked” position.
DEFAULT PROGRAMS
Type: Satellite
Position
1 Gal
1/2 Gal
1-1/2 Gal
Total Valve
215
142
322
Press 4th Key
Init. Valve Time
30
Pulse Delay
5
Pulse Valve On
10
25
Bypass Tiem
150
20
200
Brew Complete
45
30
60
Approximate Flow Rates
To determine brew time for a volume divide ounces by flow rate:
Brew Valve: .50oz sec
Bypass Valve .27oz sec
